Celestron NexStar 9.25 Instrukcja Użytkownika

Untitled DocumentCopyright (c) 2004 Cloudy Nights Telescope Reviewswww.cloudynights.com All rights reserved. No part of this article may be reprodu

Untitled DocumentThe third mode is the two-star alignment which only requires that you know the location of two prominant stars. There is also the “Qu

Untitled Documentsomewhat restrictive diameter of the reducer’s lenses. For those who want more field with the NexStar 9.25GPS, I might recommend the

Untitled DocumentThe hand controller also has a few design problems, with the most obvious one being that it won’t stay in its little “recess” on the

Untitled DocumentWith the scope properly aligned, I had lots of fun going to various targets all over the sky. To do this, all you needed to push a fe

Untitled DocumentThings I did not like:The hand controller falling out of its recess, the occasional operator “screwups” or Go-To failures (ie: the “G

Untitled DocumentI have one minor correction to David’s report regarding the user definable objects. There are actually 200 astro and 200 land objects

Untitled DocumentCelestron NEXSTAR 9.25GPSSchmidt-Cassegrain Telescope (with StarBright XLT coatings)by David Knisely Click to Email AuthorEditors Not

Untitled DocumentSuggested retail price: $3,000With the popularity of Go-To telescope systems these days, the amateur has a great deal to choose from.

Untitled DocumentThe tube assembly is attached to the fork arms using two long and slightly tapered open-frame aluminum rails which bolt onto the tube

Untitled Documentcover remains very firmly in place.The instrument comes with a 9x50 “straight-through” finder which mounts on a single low profile “O

Untitled DocumentThe entire mount and OTA are a hefty unit which weighs 58 lbs, but can be carried from either a handle on one fork arm, or by both ha

Untitled DocumentThe reviewed unit was mounted in an altazimuth fashion on the Celestron Heavy-Duty Tripod (#93499), which was quite easy to lift and

Untitled Documentthis instrument. The telescope will run from 15 V DC to as low as 9 V DC with a current draw requirement of about 1.5 amps. This can

Untitled DocumentUnder normal operation, the hand controller can be used from the stowed position in the fork arm, hand-held on its two-foot cord, or